This guide is for you if: you are geotagging photos from a GPS track and the proposed positions are wrong in a consistent way: every photo a few hundred metres further along the path than it should be, or the whole set hours away from the recording. The camera’s clock was fast, slow, or set to another time zone.

New in version 1.03. Matching photos to a track depends on the two clocks agreeing. The track’s times come from GPS and are exact; the camera’s are whatever its clock was set to. You do not need to know how far off it was. You show the app where one photo was taken and it measures the difference for you. Correcting the clock changes the proposals only; nothing is written to your files until you apply the positions in step 5.

In the app: the workflow guide under the view switcher shows the same steps as The camera’s clock was wrong.

Step 1: Load the GPS track

If you have not done so already, add your photos, choose the GPS Tracks tab and click Load GPS Track… (⇧⌘T), or drop the .gpx file on the window. Geotagging photos from a GPS track has the details.

Step 2: Pick a photo whose place you know

Select one photo that you can place on the track with confidence: click its translucent marker on the map, its tick on the time strip or its row in the file list. The thumbnail in the sidebar shows which photo you have.

A recognisable landmark that you walked or drove past works best. A place where you stopped for a long time is a poorer reference, because the track has the same position for many different times there.

Step 3: Tell the app where it was taken

With that one photo selected, open the sidebar’s Cameras tab and click Set Clock from Map… in the photo’s camera (the workflow guide’s Show me button reveals it). The pointer becomes a crosshair. Click the spot on the track where the photo was taken; Esc cancels.

The app compares the photo’s capture time with the track’s time at that spot and corrects that camera’s clock. All of the camera’s proposed positions move at once, and the status line at the bottom of the window names the camera and the correction, for example clock set 4 min 20 s fast.

  • Time zone or clock? If the difference is explained by a time zone, for example a camera left on home time, the app sets the camera’s zone and leaves the clock offset alone. The Cameras tab shows which it did.
  • You know the true time instead. If the photo shows a clock, or you photographed your phone’s time display, choose Sync Clock… in the Cameras tab (GPS Tracks → Sync Clock from Selected Item…) and type the time the photo was really taken.
  • On the time strip. You can also drag one of the camera’s ticks along the strip; the whole row moves with it.
  • A phone photo as the landmark. A photo that already has GPS coordinates can be the target: with the camera photo selected, right-click the phone photo’s marker and choose Item Was Taken Here.

Step 4: Check a second photo

Hover over another photo’s tick on the time strip to see its position on the map, and check one from late in the trip as well as one near your reference.

If the second photo is right, the correction holds. If photos later in the trip are off by a different amount, the camera’s clock was changed on the way, typically at a border or the morning you noticed it was wrong. Select the first photo taken after the change and choose Insert Clock Change Before Selected Item in the Cameras tab; then repeat step 3 with a photo from the later part. Only the photos from that point on move.

Step 5: Apply the positions

Click the group count under the file name in the sidebar to select the current group of matched photos, look over the thumbnails, and click Apply Track Positions. Only the selected photos are written. Step through the remaining groups with the arrows, or choose GPS Tracks → Apply Track Positions to All Matched Items….

If you had already applied positions before correcting the clock, the affected photos are listed as needing an update: Update Track Positions rewrites them with the corrected positions.

Step 6: Add the place names

Choose the Items tab, review the grey place-name suggestions, select the photos and choose Location → Apply All Proposed IPTC Location Tags. See applying the proposed place names.

Notes

  • One clock per camera. Photos from two cameras are corrected independently, each in its own card in the Cameras tab and its own row on the time strip. The app tells cameras apart by make, model and serial number, and by file-name runs when the files carry none. A correction never moves another camera’s photos.
  • The camera wrote the wrong zone into the files. Some cameras record a time zone with every photo. If that setting was wrong, tick Ignore the time zone in the files in the camera’s card and choose the right zone.
  • Daylight-saving changes. Cameras do not adjust themselves. When the change falls inside a trip, the camera’s card says so and asks whether the camera kept its old time or was adjusted.
  • Starting over. Reset in the camera’s card clears its clock offset, clock changes and sync points. Clock corrections can also be undone with ⌘Z.
  • The date itself is not rewritten. Correcting the clock here changes how photos are matched to the track. It does not change the capture date stored in the photos.
  • Next time. The correction is remembered for this camera and offered as a preset when its photos appear again.

In a different situation?

← All step-by-step guides